Hardfacing
KM-100
For metal to metal wear. Hardfacing of gears and wheels.
- KS D 7035 : DF2A-250-R
- EN 14700 : EFe 1
- JIS Z 3251 : DF2A-250-R
KM-250
For metal to metal wear. Hardfacing and repairing of worn parts such as shafts, gears and wheels, etc.
- KS D 7035 : DF2A-250-B
- EN 14700 : EFe 1
- JIS Z 3251 : DF2A-250-B
KM-300R
For metal to metal wear. Hardfacing of shafts rollers and similars.
- KS D 7035 : DF2A-300-R
- EN 14700 : EFe 1
- JIS Z 3251 : DF2A-300-R
KM-300
For metal to metal wear. Hardfacing of couplings, rails and gear parts, etc.
- KS D 7035 : DF2A-300-B
- EN 14700 : EFe 1
- JIS Z 3251 : DF2A-300-B
KM-100C
For metal to metal wear. Hardfacing of gears and shafts.
- KS D 7035 : DF2A-350-R
- EN 14700 : EFe 1
- JIS Z 3251 : DF2A-350-R
KM-350
For metal to metal wear. Hardfacing of rollers, shafts and sprockets, etc.
- KS D 7035 : DF2A-350-B
- JIS Z 3251 : DF2A-350-B
KM-500
Hardfacing of rollers, sprockets, screw conveyors and bulldozer blades, etc.
- KS D 7035 : DF2B-450-B
- JIS Z 3251 : DF2B-450-B
KM-700
For scratching abrasion. Hardfacing of mixers, cutter knives and dredgers, etc.
- KS D 7035 : DF2B-700-B
- JIS Z 3251 : DF2B-700-B
KSB-2
Hardfacing of clutch, cams, forming dies and forged metal moulds.
- KS D 7035 : DF3B-600-BR
- JIS Z 3251 : DF3B-600-BR
KM-800
For scratching abrasion. Hardfacing of pump casings, impellers and buckets, etc.
- KS D 7035 : DF3C-700-B
- JIS Z 3251 : DF3C-700-B
KM-800D
KM-11Cr
For wear and corrosion resistance at elevated temperature. Hardfacing of cutting tools, shearing blades and similars.
- KS D 7035 : DF4B-500-B
- JIS Z 3251 : DF4B-500-B
KM-900
For impact and abrasion resistance. Hardfacing of crushers, high manganese stlle rails, bucket lip and shovel teeth.
- KS D 7035 : DFMA-250-B
- JIS Z 3251 : DFMA-250-B
KM-650
KM-1000
For severe abrasion. Hardfacing of cutter knives, shovel teeth, cement mixers and fans, etc.
- KS D 7035 : DFWA-700-S
- JIS Z 3251 : DFWA-700-S
KQD-600
Hardfacing of press moulds, forged metal moulds, tool steel and hardened parts by quenching.
KM-13CrM
For wear resistance at elevated temperature. Hardfacing of ingot tongs, broaches and similars.
KBH-2
For impact and wear resistance at elevated temperature. Hardfacing of cutting tools, forming dies and shearing dies, etc.
KOSPEL-600H
Hardfacing of metal mould, thermal cutting off machime, forging mould, dotting punch, compression tap, impact tap and axis of rotation.
KOSPEL-800R