Hobart – Stick Electrodes & Welding Wire
HomeProductsWelding ConsumablesHobart – Stick Electrodes & Welding Wire
WELDING WIRE
Flux-Cored Welding Wire – E71T-11
- #H222106-R19.030″ – 2 lb. spool
- #H222106-R22.030″ – 10 lb. spool
- #H222106-RTP.030″ – 2 lb. spool Twin Pack
- #H222108-R19.035″ – 2 lb. spool
- #H222106-R20.030″ – 5 lb. spool (8″)
- #H222108-R20.035″ – 5 lb. spool (8″)
- #H222108-R22.035″ – 10 lb. spool
Solid Welding Wire – ER 70S-6 Carbon Steel
- #H305401-R19.024″ – 2 lb. spool
- #H305401-R22.024″ – 10 lb. spool
- #H305406-R19.030″ – 2 lb. spool
- #H305406-R22.030″ – 10 lb. spool
- #H305406-R29.030″ – 33 lb. spool
- #H305408-R19.035″ – 2 lb. spool
- #H305408-R22.035″ – 10 lb. spool
- #H305408-R29.035″ – 33 lb. spool
Aluminum Welding Wire – ER4043
ER4043 is a general-purpose type aluminum welding wire. It contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. It can be used to weld various grades of aluminum.
- #H381806-R18.030″” – 1 lb spool ER4043″
- #H381808-R18.035″ – 1 lb spool ER4043
Aluminum Welding Wire – ER4043
ER5356 is a general-purpose type aluminum alloy, which is typically chosen for its relatively high shear strength. In addition, it also offers excellent corrosion resistance when exposed to salt water. ER5356 should be used for welding 5000 series aluminum base metals.
- #H383806-R18.030″ – 1 lb spool ER5356
- #H383808-R18.035 ” – 1 lb spool ER5356
Stainless Steel Welding Wire – ER308L
An extra low carbon wire for the welding of type 304L, 321 and 347 stainless steels. Provides excellent notch toughness at very low temperature, and deposit a maximum of .04% carbon in the weld metal to minimize the formation of chromium carbides and consequent susceptability to intergranular corrosion.
- #H522506-R19.030 – 2 lb spool ER308L
STICK ELECTRODES
6010 Stick Electrodes
A premium cellulose stick electrode designed for the pipe welding industry, and the construction industry. It has low spatter and easy slag removal, with excellent operator control. Single or multiple pass, DCEP, all position. Construction and shipbuilding, general purpose fabrication, maintenance welding, pipe welding and vertical and overhead plate welding. 60,000 PSI tensile strength.
- #7708326010 3/32 inch – 5lb
- #7708336010 1/8 inch – 5lb
6011 Stick Electrodes
An all-purpose stick electrode for use in all positions on carbon and galvanized steel. 60,000 PSI tensile strength. Deep penetrating, ideal for welding through light to medium amounts of dirty, rusty or painted materials. Runs on AC or DCEP (reverse) polarity.
- #H112232-R016011 3/32 inch – 1 lb
- #7704566011 3/32 inch – 5 lb
- #7704586011 3/32 inch – 10 lb
- #H112244-R016011 1/8 inch – 1 lb
- #7704596011 1/8 inch – 5 lb
6013 Stick Electrodes
A light to medium penetrating all-purpose stick electrode for use in all positions, on carbon steel. 60,000 PSI tensile strength. Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Good for general, all-purpose applications and joints with poor fit-up.
- #H117119-RDP6013 1/16 inch – Qty 38
- #H117125-RDP6013 5/64 inch – Qty 23
- #H117132-R016013 3/32 inch – 1 lb
- #7704666013 3/32 inch – 5 lb
- #7704676013 3/32 inch – 10 lb
- #H117144-R016013 1/8 inch – 1 lb
- #7704706013 1/8 inch – 10 lb
7014 Stick Electrodes
For high-deposition requirements, this stick electrode is ideal for applications requiring light penetration and faster travel speeds. 70,000 PSI tensile strength. It runs in all positions on AC or DCEN (straight) or DCEP (reverse) polarity.
- #H114216-R017014 1/16 inch – 1 lb
- #H114232-R017014 3/32 inch – 1 lb
- #H114244-R017014 1/8 inch – 1 lb
- #7704647014 1/8 inch – 5 lb
- #7704657014 1/8 inch – 10 lb
- #7704847014 5/32 inch – 5 lb
- #7704857014 5/32 inch – 10 lb
7018 Stick Electrodes
A low-hydrogen electrode for use in all positions on low, medium and high-carbon steels. 70,000 PSI tensile strength. Ideal for out of position welding and tacking. Runs on AC or DCEP (reverse) polarity. Not recommended for low-voltage AC welders
- #H119916-R017018 1/16 inch – 1 lb
- #7704797018 1/8 inch – 10 lb
- #7704777018 1/8 inch – 25 lb
- #7704827018 3/32 inch – 5 lb
- #7704767018 3/32 inch – 10 lb
7018AC Stick Electrodes
A low-hydrogen electrode for use in all positions on low, medium and high-carbons steels. 70,000 PSI tensile strength. Ideal for out of position welding and tacking. Runs on AC or DCEP (reverse) polarity. Specially formulated to operate with small 208/230 volt AC welders.
- #H119832-R017018AC 3/32 inch – 1 lb
- #H119844-R017018AC 1/8 inch – 1 lb
- #7704747018AC 1/8 inch – 5 lb
- #7704757018AC 1/8 inch – 10 lb
7018 XLM Stick Electrodes
A low-hydrogen extra low moisture electrode for use as a high deposition rate iron powder electrode designed for DC reverse polarity or AC operation in all positions. It provides excellent operator appeal with a quiet arc, minimal spatter and good re strike capabilities.
- #7708347018 XLM 3/32 inch – 10 lb HSC
- #7708357018 XLM 1/8 inch – 10 lb HSC
Cutting/Chamfering Electrodes
For cutting, beveling, or gouging of all metals and removal of weld joint overlays or other unwanted materials. All-position, AC/DC (electrode positive).
- #H990001-RDP3/32 inch – Qty 4
Hard Surfacing Stick Electrodes, Build-up
High-chromium carbide alloy steel electrode used for build-up on carbon, low-alloy or austenitic manganese metals. Excellent abrasion resistance, good impact and improved corrosion resistance. AC/DC (electrode positive preferred). For 1/2″ to 3/4″ base materials, preheat to 200°F and cool slowly.
- #H542144-RDP1/8 inch – Qty 4.
Hard Surfacing Stick Electrodes, Overlay
High-chromium manganese-alloy electrode used for buildup and overlay. Used for austenitic, carbon and low-alloy steel. Excellent impact resistance, good abrasion resistance and improved corrosion resistance. AC/DC (electrode positive preferred). For 1/2″ to 3/4″ base materials. Preheat to 200° F and cool slowly.
- #H544051-RDP1/81/8 inch – Qty 4.
Nickel 55 Stick Electrodes
For repair in all positions of materials with 55% nickel cast iron. This electrode produces welds with higher strengths and ductility than the straight nickel electrodes. Deposits are machinable, but harder and more resistant to cracks and abrasion than high-nickel welds. AC/DC (electrode positive). Preheating is mandatory on cast iron.
- #H500631-RDP3/32 inch – Qty 10
- #H500644-RDP1/8 inch – Qty 4
Stainless Steel 316L Stick Electrodes
For molybdenum bearing stainless steels with 1.5 – 3.0% Mo. Primarily used for resistance to pitting, acids, and general corrosion. Maintenance quality smooth running electrode for welding most stainless steels. All position. Extra low carbon content to resist pitting. 80,000 PSI tensile strength. Material to be welded should be clean of all contaminants. Maintain a short arc and use stringer beads rather than a weave technique.
- #H482930-RDP3/32 inch – Qty 5
Nickel 99 Stick Electrodes
This high nickel content electrode is good for castings of light to medium weight. Welds are easily produced in all positions and the deposits are readily machined. AC/DC (electrode positive). Preheating is mandatory. Cool slowly in still air.
- #H500531-RDP3/32 inch – Qty 10
Aluminum Stick Electrodes – 4043
Aluminum welding for flat, horizontal and vertical applications. DC (electrode positive) only.
- #H722830-RDP3/32 inch – Qty 10
- #H722844-RDP1/8 inch – Qty 10
Nomacast Electrodes
This high nickel content electrode is good for castings of light to medium weight. Welds are easily produced in all positions and the deposits are readily machined. AC/DC (electrode positive). Preheating is mandatory. Cool slowly in still air.
- #H500531-RDP3/32 inch – Qty 10
Stainless Steel 308L Stick Electrodes
Aluminum welding for flat, horizontal and vertical applications. DC (electrode positive) only.
- #H722830-RDP3/32 inch – Qty 10
- #H722844-RDP1/8 inch – Qty 10
Stainless Steel 312 Plus Stick Electrodes
For hard-to-weld or dissimilar metals, stainless, high-carbon, cast, and high-nickel steels. All position, AC/DC (electrode positive), easy strike and re-strike, high moisture resistance, self-detaching slag.
- #H480630-RDP3/32 inch – Qty 5
- #H480644-RDP1/8 inch – Qty 5
Gas Welding Rods
Mild steel copper-coated oxy-acetylene gas welding rods are made of high-quality carbon steel of uniform and tightly controlled analysis. These rods have a melting point of 2750° F and produce quality welds of up to 65,000 PSI tensile strength. Ideal general purpose rod for welding all low-carbon steels. Available in 1 lb. packs.
Part No. | Type | Diameter | Length | Qty. |
#770514 | Copper-Coated Steel (RG-45) | 3/32″ | 18″ | 8 |
#770513 | Copper-Coated Steel (RG-45) | 1/8″ | 18″ | 8 |
Low-fuming bronze gas welding rods are made of copper/tin alloy to produce a rod that flows easily, joins a variety of metals including cast and malleable iron, galvanized steel, bronze, copper and steel. These rods have a melting point of 1630° F and produce strong joints up to 63,000 PSI tensile strength. Bare bronze rods require flux (see #770119 below). Available in 1 lb. packs.
Part No. | Type | Diameter | Length | Qty. |
#770510 | Bare Bronze | 3/32″ | 18″ | 8 |
#770509 | Bare Bronze | 1/8″ | 18″ | 8 |
#770512 | Flux-Coated Bronze | 3/32″ | 18″ | 8 |
#770511 | Flux-Coated Bronze | 1/8″ | 18″ | 8 |
Brazing Rods (Uncoated)
Flat, high-strength, self-fluxing alloy for copper-to-copper (without flux) and copper-to-bronze with 5130 flux. Preheating is recommended for some applications.
Part No. | Diameter | Length | Qty. |
#770205 | 1/8″ | 17-1/2″ | 10 |
Brazing Flux
For use with bare bronze. Cleans well to allow for good adhesion. Comes in a 0.5 lb. canister. #770119
Aluminum Rods
Low-temperature, self-fluxing rod for use on aluminum and magnesium. 700° F melting temperature.
Part No. | Diameter | Length | Qty. |
#770206 | XX″ | 18-1/8″ | 8 |